Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...

A Solution for Wind-Induced Vortex-Shedding Vibration of the Harmony and Heritage Platforms During Transpacific Tow
This paper describes the results of an advanced procedure for analyzing wind-induced vortex-shedding vibration (VSV) which was used for the transpacific tows of the Harmony and Heritage...

Case Study of Offshore Pile System Reliability
This paper presents the results of research effort to evaluate the reliability of offshore pile foundation systems. It is an extension of previous work by the authors [14] dealing with...

2012 Geo-Wall Competition
Highlights from the Geo-Wall Competition at the 2012 Geo-Congress. Teams from 17 universities competed to construct a model mechanically stabilized earth (MSE) retaining wall out of craft...

Hurricane Katrina
This chapter provides an overview of Hurricane Katrina, including data on its category, its path and intensity, and its effect on wind and water forces....

Strong Diagonals
Exterior Diagonal Systems that carry both gravity and lateral loads in building structures � known as exodiagonals or diagrids � are increasingly being used worldwide to provide freedom...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Wind
This chapter discusses the tabulation of wind force data in Microsoft Excel....

Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...

Forensics and Case Studies in Civil Engineering Education: State of the Art
This paper reviews the state of the art in the use of forensic engineering and failure case studies in civil engineering education. The study of engineering failures can offer students...

Stability and Loads
This chapter examines stability and loads. Topics include stability and lateral load resistance during construction; effective lengths of cantilever columns; effect on stability of frame...

Effect of Column-to-Beam Strength Ratio on Seismic Performance of RC Moment Frames
Reinforced concrete (RC) moment frames are often used in building applications. During strong earthquake excitations, such buildings have been subject to soft-story or column sidesway...

The Effect of the Slab on Beam-Column Joint Behavior
The three-dimensional effect of slab interaction on frame behavior has been observed in lateral load tests on beam-column-slab elements....

Control of Wind Response of the Trump World Tower
The Trump World Tower is a luxury residential building located on 1st Ave. and 48th St. in New York City,...

Digging for Answers (Available in Geoenvironmental Engineering Special Issue only)
Research at the six facilities that make up the National Geotechnical Experimentation Sites (NGES) has included tests on minipiles, groups of driven piles, shafts drilled in rock, and...

Testing the Load (Available in Geoenvironmental Engineering Special Issue only)
The Pittsburgh District of the U.S. Army Corps of Engineers recently began construction of a new gated dam to replace a nearly 100-year-old concrete fixed-crest dam on the Monongahela...

Towers in Motion (available in Structural Engineering Special Section only)
Undersea towers are typically designed to rigidly resist the forces of water and wind. But one type of tower is designed to be flexible and, rather than rely on its platform strength to...

Structural Surgery
Structural engineers had to transform four existing buildings and two new buildings into a new non-profit center for Jewish history. The buildings were of varying ages and had different...

Cap of Concrete
The roof of a new $84 million arena in New Orleans was built using techniques usually seen in tied-arch concrete bridges. The concrete components of the roof carry the large compression...

Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...

 

 

 

 

Return to search